Configuring TP-Link TD-W8950ND

Setting up your Kiwilink internet connection

 

Upgrading to the latest firmware.

 

  1.  Download the latest firmware from: http://www.tp-link.com/en/support/download/

           

  1. Download the firmware by clicking the link

           

           

 

  1. Extract the file to your desktop by double clicking it once completed.
  2. Enter TP-Link’s IP address into your web web-browser IP number (192.168.1.1)

 

                                                                       Log in: Username: admin Password: admin

                                                                   

 

  1. Select Management from the side bar

             

  1. Select Upgrade Firmware from the sidebar, select Choose File and select the extracted firmware and click Update Firmware.

How to configure your modem to Kiwilink

1.      Enter TP-Link’s IP address into your web web-browser IP number (192.168.1.1)

 

                                                                       Log in: Username: admin Password: admin

 

 

          2.      Click ‘Advanced Setup’ on the sidebar.

 

                                                                

  

          3.      Click WAN Service

                                                                        

 

          4.      Click the remove box and select Remove.

 

                  

          5.      Select ATM Interface from the sidebar and also remove it.

                  

          5.1    Now click Add

                  

         5.2     Enter the following and click Save/Apply, you will be taken to another screen to confirm.

                  

          6.      Go back to WAN Service

                                                             

           7.      Click Add

                   

          8.      Click next

                

          9.      Click next

                 

 

          10.    Match the settings with the below, replacing the                                username and password with your credentials.

                               

           11.   Click next

                         

          12.    Click next

 

                  

          13.    Click Save/Apply

              

How to Configure Wireless

  1. Click Wireless

                    

  1. Full in the below

                 

  1. Click Security on the sidebar.

                 

   

Click Apply/Save and you’re done.